Chimney repointing
Raking out failed mortar on the stack and repointing it, so weather cannot get into the joints.
Chimney repairs
Chimney repair and chimney repointing for homes in Whitehaven, Workington and West Cumbria: the stack, the pots, the flaunching and the flashings around it.
Call Chris for a clear written quote. We will tell you what access the work needs, because it is done at height.
What we do
Raking out failed mortar on the stack and repointing it, so weather cannot get into the joints.
Renewing the mortar flaunching around the pots, and refitting or replacing pots that have worked loose.
Cutting out failed bricks or stones and repairing the stack. Rebuilding comes later, and only if the chimney needs it.
Repairing or renewing the flashings where the chimney meets the roof, which is a common place for leaks.
Chimney work is done at height. The written quote will say what access the job needs. Roof tile and ridge repairs are on our roof and storm repairs page. For lime pointing on older stone stacks, see lime repointing.
How it works
From the ground it can be hard to tell whether a chimney needs a repoint or a more serious repair. We look at the stack, the flaunching, the pots and the flashings, and we tell you what we can see. If we cannot see enough from the ground, we will say so, rather than guess.
You get a clear written quote before we start. There is no pressure to go ahead.
Step 1
Pictures of the chimney from the garden, and any shots of a leak inside, are a good start. Call 07546 971358 if you would rather just talk.
Step 2
We look at the pointing, the pots, the flaunching and how the stack meets the roof.
Step 3
The quote covers the repair itself and the access equipment the job needs.
Step 4
We do the work, check the flashings, and leave the roof and the ground tidy.
Chimney repair
On this coast, wind and rain work on chimney stacks all year. The mortar in the joints is often the first thing to go. Once the pointing has weathered out, water gets into the brick or stone, and the stack starts to crumble or stain the breast inside. Chimney repointing, done in time, is usually a smaller job than waiting for bricks to fail.
The flaunching is the mortar bed that holds the pots and sheds water off the top of the stack. When it cracks, water runs down the flue or into the brickwork. Pots can also work loose. These are common chimney repairs, and they are worth doing before a pot becomes unsafe.
Leaks around a chimney are often at the flashing, not in the stack itself. We repair or renew those flashings as part of chimney work. If the rest of the roof has slipped tiles or a loose ridge, that is better handled as a roof repair, and we will point you there.
Older stone chimneys may need lime, not a hard cement, so the stone can dry out. In that case the pointing details sit with our repointing page, and we treat the chimney as part of the same careful approach.
Where we work
We repair and repoint chimneys on homes in Whitehaven, Workington, St Bees and across West Cumbria. Call Chris to talk your chimney through.
Questions
They often go together, but they are not the same job. This page is about the chimney itself: repointing the stack, flaunching, pots and the flashings around it. Slipped tiles, ridges and general roof leaks are on our roof and storm repairs page.
Chimney work is done at height, so we will tell you in the quote what access the job needs. That might be scaffolding or other access equipment, depending on the house. We do not fix a scaffolding price in advance, because it depends on the building.
Many chimneys only need repointing and new flaunching. If the stack is leaning, the brickwork has failed, or pots are unsafe, more work is needed. We look first and tell you what we see.
Yes. Photos from the ground, and any pictures you already have from the roof, are a help. Call Chris and you will get a clear written quote, with no pressure to go ahead.
Contact
Tell us what you need and where. Send the form, call Chris, or send the details on WhatsApp.